Browse equipment from Australian retailers and specialist overseas brands. Prices shown are dated listings; the seller confirms the current price and delivery.
A pair of steel dumbbells with interlocking plates secured by twist-lock screws. Vulcan offers a separate extension package advertised at 49 kg per hand, while the selected base listing is sold as a 36 kg pair.
A$849Listed 17 Oct 2026
This Quick-Lock pair reaches 75 lb, about 34 kg, per hand using square plates and partially turning locking screws. The supplied plates and screws need no selector cradle; a stand is separate.
An adjustable bench with eight back positions, four seat settings and an included leg stabiliser for decline work. The 26 kg frame has transport wheels, and a separate leg-curl and preacher attachment set is available for additional exercises.
A$399Listed 17 Oct 2026
BlackWing’s sliding seat closes the pad gap, while twelve back angles include decline. Six seat settings and a choice of pad widths make this a highly adjustable bench weighing about 59.4 kg.
A joined two-upright barbell station built from 80 mm square steel, with J-hooks and band pegs listed in the package. NC specifies a 125 × 130.3 cm frame footprint and compatibility with its HR Series attachments.
A$595Listed 17 Oct 2026
PR-4000 uses 5/8-inch attachment holes with one-inch spacing through the bench zone. Its modular frame comes in different layouts and depths, with compatible storage and cable additions.
A vertical Smith machine with linear bearings and a 198 cm frame height, intended for rooms with limited ceiling clearance. The Australian package includes Olympic sleeves; optional J-hooks and spotter arms extend it to free-barbell work.
A$825Listed 17 Oct 2026
The G1 V2 combines a rack with plate-loaded 2:1 cables, a pull-up bar and a landmine. Its 21 cable-height positions add accessory work to the same 145 cm-wide frame used for barbell lifts.
A$1,599Listed 17 Oct 2026
RowErg combines an air flywheel, sliding seat and PM5 workout monitor. This standard-leg model separates into two sections without tools, keeping storage manageable once the rowing area is clear.
MX55 EVO’s knurled-handle pair offers ten settings from 4.9 to 25.3 kg per hand. The rack-and-pinion selector locks into position, with unused plates held in the supplied cradles.
A full cage with a multi-grip pull-up bar, sandwich J-hooks and padded internal spotters included. Its listed 120 × 130 cm footprint and 215 cm height make it a straightforward base for a home barbell station.
A$799Listed 17 Oct 2026
The Australian PÉPIN FAST package supplies steel-plate dumbbells and metal cradles with 42.5 kg per hand. Sliding selectors handle the main changes, and matching kits increase the maximum to 52.5 or 62.5 kg.
Ares 2.0 adds adjustable cables, pulldowns and seated rows to a matched six-post REP rack. Two rear-mounted 260 lb stacks provide nominal output of 130 lb per adjustable handle at 2:1.
A chrome curl bar with deeper bends than a conventional EZ bar and rotating sleeves on copper bushings. Its 27 mm grip and several angled hand positions make it a compact accessory for curls and triceps exercises.
A$89Listed 17 Oct 2026
A Smith machine, rack and plate-loaded cable station share the G3 V2 frame. J-hooks, front safeties, a landmine and cable handles are included, while the cables offer 21 height positions.
A$2,699Listed 17 Oct 2026
The G12 pairs a counterbalanced Smith with two selectorised cable stacks and a rack. Its 1:1 pulleys provide the selected stack load at each handle; an included footplate adds Smith leg presses.
A$4,999Listed 17 Oct 2026
G15’s cable connections switch between 2:1 and 4:1, giving nominal maxima of 65 kg or 32.5 kg from each 130 kg stack. A counterbalanced Smith and rack complete the main strength stations.
A$5,299Listed 17 Oct 2026
G20 Pro combines a rack and Smith machine with two 130 kg stacks at 2:1. Its included equipment extends to monolifts, a leg-press plate and a swing arm for a bag or rope trainer.
A$8,499Listed 17 Oct 2026
C10 V2 provides six cable connections through adjustable arms and separate upper and lower centre outlets. A single-track Smith shares the frame, while the lower cables can combine both stacks for heavier work.
A$6,999Listed 17 Oct 2026
Sport 24 puts eight loads from 3 to 24 lb into each compact dumbbell. A magnetic pin selects the weight, with an open rubber-grip handle and a maximum of about 10.9 kg per hand.
Pro 50 combines urethane-coated steel plates with an open handle and a 50 lb maximum per hand. A selector pin handles the main changes; removable handle weights provide the smaller steps.
Elite EXP Stage 1 supplies a 5–50 lb pair, with unused plates left nested beneath the selected load. Matching expansion stages let the pair grow beyond its starting 22.7 kg per-hand ceiling.
NÜOBELL changes weight by twisting the handle while the dumbbell rests in its cradle. This Australian black-handle pair runs from 2 to 32 kg per hand in 2 kg steps, using machined steel plates.
VERVE’s rotating-handle dumbbell offers twenty settings from 4 to 32.5 kg in 1.5 kg steps. The listing supplies one dumbbell and docking base; a pair requires two units.
LSG’s V1 package includes two dial-adjustable dumbbells and a steel stand. Each hand has fifteen settings from 2.5 to 24 kg, with the storage and loading position included in the purchase.
A$449Listed 17 Oct 2026
Nighthawk offers seven back angles from flat to 85°, four seat positions and upright storage. At 40 kg, its shorter frame takes less moving than REP’s heavier AB-5200 or BlackWing.
AB-5200 2.0 has a 105.9 cm back pad, ten back settings and four seat angles. Wheels and upright storage help manage its 52.16 kg frame, which carries a published 1,000 lb capacity.
VOLTRA I puts one motor-controlled cable in a rechargeable 5.8 kg unit. It provides up to 200 lb of resistance through 2.6 m of cable, with controls on the device and a separate mounting purchase.
Trainer+ is a floor platform with two motor-driven cables and up to 200 kg of combined resistance. The checked Bing Lee Standard Kit was sold out, while Vitruvian’s former purchase link led to an update-signup page.
Gym Monster 3 Core includes the machine, training accessories and folding platform, with no bench. It supplies 100 kg total digital resistance and a 23.8-inch screen; the shared listing’s 120 kg figure belongs to GM3S.
Gym Monster Ultra adds a pull-up structure, overhead pulldown position and 33 cable positions to a 120 kg-total digital system. The 125 kg machine has a larger platform and two 1,000 W motors.
ANCORE Pro supplies a mechanical spring-resistance cable without a motor or weight stack. The Standard set includes a strap mount and handle, with 5–55 lb in the box and a 65 lb system ceiling after expansion.
WalkingPad R2 switches from under-desk walking to running mode when its handrail is raised. The 120 × 44 cm belt reaches 12 km/h in that position, and the deck folds to a one-metre stored length.
WB5 offers eight back positions and three seat angles, then folds to 30.1 × 13 × 8.6 inches. The manufacturer lists an 800 lb capacity for this WB5/FB149 model.
PR-5000 is REP’s modular rack with one-inch attachment holes and numbered two-inch spacing. Height, depth and storage choices let the frame accommodate matching Ares or Athena cable configurations.
RM-3 is a compact four-post Monster rack with one-inch hardware and a choice of 24- or 30-inch inside depth. The US builder offers four upright heights, and floor anchoring is required.
RML-390F provides a full Monster Lite rack with 30 inches between the uprights. Its flat-foot base avoids floor bolting, and the standard package includes J-cups and pin-and-pipe safeties.
RML-3W folds sideways against the wall after its removable pull-up bar comes out. The Monster Lite frame offers 21.5- or 41.5-inch inside depth and folds to less than five inches of projection.
FM-6 Twin places two independent cable stacks inside a full Monster rack. Dedicated lat and low-row outlets combine their outputs internally, allowing station changes without reconnecting cables.
Arcadia supplies two adjustable 2:1 cable sides in a shallow frame with a pull-up bar. Its 32 trolley positions support varied accessory work, with standard output of 38.6 kg per handle.
Wall-Mounted Athena combines two cable stacks with a fixed wall rack in a 27.6-inch-deep frame. The package includes uprights, a wall stringer, J-cups, rear stabiliser and pull-up bar.
This Summit package combines a vertical Smith, Ares 2.0 cables and a wall-mounted PR-5000 half rack. The systems share 26-inch crossmembers, with two 260 lb cable stacks and a 15 kg Smith bar.
QuickDraw’s visible steel switches select the main plates, with removable handle weights for smaller changes. This package supplies a 5–60 lb pair and cradles, reaching about 27.2 kg per hand.
Colorado combines a 28.5 mm shaft, moderate knurling and dual grip marks for mixed lifting. This 20 kg version has hard chrome on both shaft and sleeves, with composite bushings.
Double Black Diamond pairs a 29 mm uncoated stainless shaft with hard-chrome sleeves and bronze bushings. Its deep mountain-pattern knurl extends through the centre for back squats.
REP’s Open Trap Bar leaves one side clear for carries and lunges, and its built-in jack raises the sleeves for loading. Standard removable handles provide two grip heights with 25-inch spacing.
The E-Coat Ohio Bar has a 28.5 mm shaft, bronze bushings and bright-zinc sleeves. Dual grip marks and an unknurled centre give this 20 kg bar a mixed-training brief.
Ohio Power’s 29 mm stainless shaft has coarse knurling, including a knurled centre. This 20 kg model uses chrome sleeves, bronze bushings and powerlifting grip marks.
Rogue Australia’s 90 kg Echo set contains six rubber bumpers: pairs of 10, 15 and 20 kg. All have 450 mm diameter and stainless-steel centre inserts for Olympic sleeves.
A$596.75Listed 17 Oct 2026
Rogue’s colour Calibrated KG Steel Plates 2.0 use thin ductile-iron castings with rear calibration plugs. The powerlifting range carries a stated mass accuracy of ±10 g and IPF approval.
Echo Bike V3.0 combines moving arm handles with a belt-driven steel fan. The standard battery-powered LCD includes interval programmes and Bluetooth/ANT+ heart-rate connectivity.
Adjustable Bench 3.0 offers ten back positions, three seat settings and a built-in upright storage stand. Its US-made 3 × 3-inch steel frame weighs about 56.7 kg and includes wheels and a front handle.
Manta Ray uses an internal ladder mechanism, a broad front foot and a 12-inch pad. Its heavy 3 × 4-inch steel frame offers ten back settings and five seat positions, with an optional foot catch.
The stand-alone Rhino applies a plate-loaded cable trolley through a belt at the hips. Its own platform and frame keep the belt-squat station separate from the inside of a power rack.
Abram GHD 2.0 has a split hip pad and a foot-roller assembly with ten distance settings. Wheels and handles help reposition the roughly 101 kg dedicated glute-ham developer.
Super Bench PRO V2 tilts its main pad as one piece across eleven positions. Its included incline seat removes for a continuous flat pad, with compatible exercise attachments purchased separately.
BikeErg uses an air flywheel, fixed handlebars and a clutch that lets the fan turn when the pedals stop. The PM5 records sessions, with free ErgData available for workout logging.
SkiErg connects two pull handles to an air flywheel for standing ski-style training. It includes the PM5 and can be wall-mounted or installed on a separately purchased floor stand.
Hyper Pro X combines Nordic-curl, back-extension and GHD arrangements around an adjustable pad. The GHD attachment is included, while the compatible ABX Leg Developer adds plate-loaded leg extensions and curls.
PRIME’s PRODIGY HLP Single Stack links a fixed high pulley and adjustable column to one 350 lb stack. This profile covers the 2:1 variant, with seats and row supports available separately.
Eleiko Performance model 3085911 combines a 28 mm shaft and needle bearings with dual grip marks. The current 20 kg bar has mild centre knurling and a DN3 Chrome finish.
Eleiko’s 20 kg IWF training bar, model 3085912, uses a 28 mm shaft, needle bearings and the brand’s 1.2 training knurl. The current finish is DN3 Chrome.
This green 10 kg IWF training plate is Eleiko model 3085440-10. Its SBR rubber surrounds a zinc-coated steel hub, with 450 mm diameter, 35 mm thickness and a stated ±0.5% mass tolerance.
Manticore Flat Foot is a four-post rack with true 76.2 mm uprights and one-inch attachment holes. Its extended base supports the standard unbolted setup, with several heights and two overall depths.
This Bells of Steel kettlebell adjusts from 12 to 20.5 kg by changing iron plates inside a steel shell. The external shape and 35 mm handle stay the same at every selected load.
Profile PRO folds upward on assisted hinges and stores about four inches from the wall. It includes J-cups and a selectable pull-up bar, with three upright heights in the current builder.
Pro100EXP starts with a 5–40 lb pair, using urethane-coated plates, an open handle and removable micro-weights. Matching stages raise the per-hand ceiling to 60, 80 and 100 lb.
Rogue’s Deadlift Platform is a steel frame around a nominal eight-by-four-foot lifting area. The order leaves the surface to you, using optional rubber tiles or a manufacturer-specified wood-and-mat arrangement.
US$495Listed 17 Oct 2026
Rogue’s USA Aluminum collars use hinged nylon levers and internal rubber linings to clamp Olympic bar sleeves. The supplied pair weighs half a pound, with each collar occupying 1.5 inches of sleeve.
REP sells these black rubber bumpers in pound-denominated pairs from 10 to 45 lb. Steel inserts, raised white markings and a stated ±1% mass tolerance define the range.
REP’s Stand-Alone Modular Storage System 2.0 uses rack-style uprights and shelves for different equipment. Straight and corner configurations can hold dumbbells, kettlebells, balls and plates within one layout.
Tonal 2 combines two adjustable arms, a 24-inch screen and camera-assisted feedback in a professionally installed wall unit. The US specification lists 5–250 lb total digital resistance in one-pound steps.
US Commercial 1750 model NTL17125 has a 16-inch pivoting screen and a 22 × 60-inch belt. It reaches 12 mph, with incline adjustment from −3% to +12%.
Commercial 2450 model NTL19125 raises the US range’s top speed to 14 mph and screen size to 24 inches. It retains a 22 × 60-inch belt and −3% to +12% incline range.
PRIME’s RO-T8 pair combines palm-shaped supports with swivelling cable connections. The handles work independently on cable exercises or with the separately sold RO-T8 Short Bar.
The RO-T8 Short Bar connects two compatible handles to one cable, with attachment spacing from 9 to 18 inches in one-inch steps. This purchase supplies the bar alone.
Rogue’s fixed dumbbells use solid steel heads, urethane coating and straight knurled handles. The US range runs from 5 to 150 lb and is sold in pairs, so a collection can grow one weight at a time.
Try a broader search or another region.