Photo: © Bells of Steel.
Manticore Flat Foot is a four-post rack with true 76.2 mm uprights and one-inch attachment holes. Its extended base supports the standard unbolted setup, with several heights and two overall depths.
The manufacturer’s base builder displayed Unavailable on 17 October 2026; confirm the selected components.
A full three-inch attachment system is available here without floor drilling in the standard setup. The range of upright heights gives lower-ceiling rooms another option.
The drawbackTrue three-inch tubing is larger than nominal 75 mm tubing. Accessories need that exact fit, and the complete chosen configuration should be available before separate parts are ordered.
RML-390F provides a full Monster Lite rack with 30 inches between the uprights. Its flat-foot base avoids floor bolting, and the standard package includes J-cups and pin-and-pipe safeties.
A joined two-upright barbell station built from 80 mm square steel, with J-hooks and band pegs listed in the package. NC specifies a 125 × 130.3 cm frame footprint and compatibility with its HR Series attachments.
A$595Listed 17 Oct 2026
PR-4000 uses 5/8-inch attachment holes with one-inch spacing through the bench zone. Its modular frame comes in different layouts and depths, with compatible storage and cable additions.